Use the tank model and manufacturer parts diagram to identify the replacement flapper. Then check that the new part matches the flush-valve opening and mounting arrangement. The size determines whether the part fits. On an adjustable model, the setting changes how much water passes through during a flush.
Check the flush valve before ordering
| Check | Practical distinction |
|---|---|
| Opening size | Measure across the opening the flapper seals, with the water off and the tank drained. Fluidmaster lists its 502 in the 2-inch class and its 5403 in the 3-inch class. Confirm the part with the tank documentation. |
| Mounting arrangement | Compare the mounting ears and chain attachment. Check the parts diagram for a tower or canister design, which may require a different seal. |
| Closed position | Check that the seal sits flat and the lever and chain let it close fully. Follow the specified slack for the actual part and check for free movement. |
Tune an adjustable flapper using its own instructions
Keep the manufacturer’s tank water level as the starting point and let the tank refill before comparing flushes. Fluidmaster’s 5403 sheet says to start at setting 10. When using its generic adjustment procedure, lower the setting one step at a time until flushing becomes inadequate, then go back up one step. The same sheet gives model-specific settings for some toilets. Use the instructions that apply to the exact replacement and tank.
A dial number does not convert to gallons per flush. If the toilet runs after the tank refills, first check whether the chain prevents the flapper from closing or whether water reaches the overflow tube. Changing the dial is not a substitute for correcting those conditions.
Count repeat flushes when comparing usage
Suppose six uses each take one 1.20-gallon flush. That is 7.20 gallons. At a hypothetical 1.10 gallons per flush, one repeat among the same six uses produces seven flushes and 7.70 gallons. The lower setting uses 0.50 gallons more in this example. These are illustrative volumes, not measurements of the Fluidmaster models or allowable settings for a particular toilet.
See what a toilet’s GPF rating means and how to estimate water lost to a toilet leak for those separate questions.